CAUTION

Be sure both control valves (2 & 3) are in off position before connecting air supply to valve (14). Lock lid to drum (15) To Start - connect air supply to universal coupling (14). Screw Handle (4) - unwind up to fully open position for vacuum only operation.

Float Valves (12) - to be attached to black threaded tubes for wet operation.

WET OPERATION - only

Close Reverse valve to down position (4). Turn valve (2) to start vacuum.

Float valves will rise as fluid rises in drum shutting off vacuum even if air supply is still active.

Reverse OPERATION - only

Install drop pipe into lid. Connect vac/pump hose to port (1). Close Vacuum valve (2). Turn valve (3) to start reverse pump out.

Dry OPERATION - only
Connect dry filter cartridge (13) to lid using springs (10). Vacuum - Screw Handle up - activate control (2).

Reverse Filter Clean - Screw Handle down - activate control (3).